Shop

Real High Flow: Save Up to 30% of Your Time

The Bambu High Flow Nozzle’s optimized melt zone enables significantly increased volumetric speed, achieving up to 62.5%1 higher max volumetric speed and reducing print time by up to 30%2 with ease. The larger your model, the more time you saveespecially for prints with extensive infills.

1. Tested with ABS, 240mm single-wall cylinder, 0.2mm layer height, 1.0mm outer wall, 280 nozzle temperature, spiral vase mode on.
2. Tested with PLA Basic, 15% infill, 300x300x300mm cube.

High-Speed Precision: Sharp Details Every Time

Say goodbye to under-extrusion, rough surfaces, and loss of detail. Unlike standard high-flow nozzles, Bambu’s high yet consistent extrusion ensures crisp edges, flawless texturing, and ultra-smooth surfacesevery single time.

Upgrade now and print faster without compromise!

Printer Compatability

*Bambu High Flow Nozzle is compatible with A1 Series, but it will not improve volumetric speed. In other words, the High Flow Nozzle performs the same as a standard nozzle on the A1 Series.

Filament Compatibility

[Note]

1. Filaments with carbon fiber, glass fiber, metal, or other inorganic particles are prone to clog a 0.2 mm nozzle.
2. For filaments containing carbon fiber or glass fiber, it is highly recommended to use a hardened steel 0.6 mm nozzle to minimize the risk of clogging and abrasion.
3. Bambu PLA-CF and Bambu PETG-CF have been extensively tested and proven to have a low risk of clogging when printed with a hardened steel 0.4 mm nozzle, while also achieving higher print quality.

Learn more about filament compatibility on Bambu Lab Wiki.

Quick Swap Nozzle Design

*Please ensure that the hotend has cooled down before swapping, and avoid touching the heat block (lower section of the hotend) to prevent any risk of burns.

*Learn more about replacing the Hotend on Bambu Lab Wiki

In the Box

Product Specifications